System Overview: Signals

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2013 Volvo C70, 2012 Volvo C70, 2011 Volvo C70, 2010 Volvo C70, and 2009 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

The table below summarizes the input signals to and output signals from the trailer module. The signal types are divided into directly connected signals and CAN communication. The illustration below (Fig 1) displays the same information with the Volvo component designations.

Input signals	Output signals
Directly connected:	Directly connected:
Stop lamp signal from right-hand stop lamp (10/43)	To tow hitch cable harness: Right turn signal lamp Left turn signal lamp Stop lamp right Stop lamp left Parking lamps Back-up lamp Fog lamps +12 V.
Via Controller Area Network (CAN) communication:	Via Controller Area Network (CAN) communication:
Central electronic module (CEM) (4/56).	Central electronic module (CEM) (4/56). Driver information module (DIM) (5/1) Differential electronic module (DEM) (4/82) Parking assistance module.

Fig 1: Identifying Signals

Courtesy of VOLVO CARS CORPORATION