Power Supply Mode (Status)

The status shows the vehicle's power supply mode. Central Electronic Module (CEM) collects information from relevant control modules and sensors, and generates the parameter. Information is stored in the Central Electronic Module (CEM) and is distributed to other control modules via the communication network that connects the Central Electronic Module (CEM) and the current control module, e.g., CAN.

The following status modes are available: 

• Key removed.
• Key recently removed.
• -Key approved.
• Ignition off after Accessory position.
• Accessory position.
• Accessory position after Ignition on.
• Ignition on.
• Combustion engine running.
• Combustion engine in auto-stop.
• Combustion engine in start attempt.
• Combustion engine in start attempt at manual start.