FSM-U300066: Control Module. Algorithm Based Failures. Signal Has Too Many Transitions / Events (2007-2012): Fault-Tracing: Fault-Tracing
- Ignition off for 10 seconds and then on again.
Check and rectify the diagnostic trouble codes in the following control modules and order.
- Forward Sensing Module (FSM).
- Engine control module (ECM).
- Brake control module (BCM).
- Central electronic module (CEM).
- Driver information module (DIM):
Once the fault has been rectified the diagnostic trouble code (DTC) must be deleted from the above control modules.
NOTE:Deletion of the diagnostic trouble codes in the above control modules must take place in the same driving cycle.
- Continue
Refer to VERIFICATION