Connecting The Breakout Box

Special tools: 

see 9511463

see 9511428

see 9511499

see 9813190

Fig 1: Identifying Breakout Box

Courtesy of VOLVO CARS CORPORATION

• Ignition off
• Remove the fuse.
• Remove the side panel.
• Unplug the control module connector.

Connect adapter see 9511463 to the control module's connector. Connect breakout box see 9511428 and cable harness see 9511499 to the adapter. Alternatively, breakout box see 9813190 can be connected to the adapter.

Disconnect the breakout box in reverse order.

Other information 

• see SIGNAL SPECIFICATION
• see CONTROL MODULE FRONT SEAT