Description Of Programmable Parameters, Customer Adaptation
WARNING: This page is about a different variant/trim than selected.
Certain parameters for the Climate Control Module (CCM) can be read off and programmed using this function. The purpose of this programming is to:
- read the programmed parameters before replacing the control module. This is so the same parameters can be entered into the new control module
- adapt the function of the control module for the equipment levels of the vehicle (passenger compartment ventilation filter, parking heater).
- adapt the function of the control module to the requirements of the driver (customer adaptation).
Programmable parameters depend on vehicle model and selected options:
- seat heating, adjusting the different levels
- seat ventilation, adjusting the different levels
- the time that seat heating shall be on after it has been activated.
Setting the seat temperature, value
Enter the setting for the high and low temperature levels for heating the front seat.