Combustion Heater, Transfer Of Components: Notes

NOTE: For information on Volvo color coded illustrations, refer to: IMAGES

If necessary

Courtesy of VOLVO CARS CORPORATION

NOTE:

Orientation view

Courtesy of VOLVO CARS CORPORATION

Loosen the clip.

Disconnect the connectors.

Remove the marked part.

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

Loosen the clips.

Remove the screws.

Torque: Bracket, to Coolant heater, 8Nm

Remove the marked part.

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

NOTE:

Note the position of each component before removal.

Loosen the hose clamps.

Undo the hoses from the connections.

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

Remove the screw.

Torque: Connecting piece, to Fuel operated auxiliary heater, 7.5Nm

Remove the marked part.

Courtesy of VOLVO CARS CORPORATION

NOTE:

Make sure that the seal is correctly located.

NOTE:

Use new seals.

Courtesy of VOLVO CARS CORPORATION

CAUTION:

Make sure that new bolts are installed.

Remove the screws.

Torque: Exhaust pipe, to Fuel operated auxiliary heater, 4.5Nm

Remove the marked part.

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

Loosen the hose clamp.

Undo the hose from the connection.

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

Loosen the clip.

Remove the screw.

Torque: Bracket, to Coolant heater, 8Nm

Remove the marked part.

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

Undo the hose from the connection.

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION