Fuel System Pressure Release

Fuel system pressure release procedure not available at time of publication. It may be possible to remove fuel pump relay, start engine, and run engine until fuel pressure drops (engine stalls). See DME & FUEL PUMP RELAY LOCATION table and Fig 1.

DME & FUEL PUMP RELAY LOCATION

Application

Location

6-Cyl.

⁽¹⁾ Behind Cover, Along Engine Compartment Firewall

⁽¹⁾	First relay (viewed from left to right) after ground wire is fuel pump relay followed by Digital Motor Electronics (DME) master relay.

Fig 1: Locating DME/Motronic System Relays

Courtesy of BMW OF NORTH AMERICA, INC.