If Slow to Calibrate: Notes
WARNING: This page is about a different car, the 2016 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
The ideal calibration condition is driving on a 2 lane divided highway with markings on both sides of the lane. One or more of the following conditions may increase the length of time required to complete the self-calibration procedure:
- Heavy traffic
- Stop and go traffic
- Mountain roads
- Curves in roadway
- Poor contrast lane markings
- Botts' Dots type lane markings
- Operating the vehicle at speeds greater than recommended
- Driving through snow or fog or driving directly into the sun
- Camera not properly installed. Verify it is snapped into tabs and is secure. Refer to Front View Camera Replacement (With UFL) , Front View Camera Replacement (With UGN) and Front View Camera Replacement (With UQT) .