Toe-In Adjustment (Rear)
- Adjust left and right sides separately. Lubricate threads of Turnbuckle Adjuster (J-38118). On Lumina and Monte Carlo, install turnbuckle adjuster in rear rod access hole closest to center of rear suspension support and other end to rear suspension support. On Cutlass Supreme, install turnbuckle adjuster between hole in rear suspension rod and hole in jackstand pad. See Fig 1
. On all models, hand-tighten turnbuckle adjuster in direction of adjustment.
- Loosen nut on bolt securing rear suspension rod to crossmember at least 4 turns. Rotate turnbuckle adjuster as necessary until rear toe-in is as specified. See WHEEL ALIGNMENT SPECIFICATIONS
. Tighten rear suspension rod nut at crossmember to specification. See TORQUE SPECIFICATIONS
.
Courtesy of GENERAL MOTORS CORP.