Transmitter Programming & Synchronization: Notes

Each transmitter has a unique vehicle access code that changes every 5 seconds. If a transmitter or receiver is replaced, each transmitter must be programmed to vehicle's receiver. Entering a specific button sequence on the Driver's Information Center (DIC), up to 3 transmitters can be programmed into receiver. After programming transmitters to vehicle, receiver will update this code every 5 seconds in order to match the code programmed in transmitter.

The transmitter may not communicate or may loose synchronization with the receiver if any of the following situations occur:

• Transmitter battery is removed.
• Vehicle battery is disconnected.
• Transmitter and vehicle are have not communicated for 2 weeks or more.
• Receiver is disconnected.

Perform synchronizing procedure if transmitter does not communicate or is not synchronized with receiver. See SYNCHRONIZING TRANSMITTERS  . If transmitter and/or receiver are replaced, perform programming procedure. See PROGRAMMING TRANSMITTERS  .