LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2001 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Body Control Modules >> Programming >> Feature Customization Modes >> Remote Unlock Control Customization
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Remote Unlock Control Customization

  1. If vehicle is equipped with Remote Keyless Entry (RKE) system, enter feature customization mode. See ENTER FEATURE CUSTOMIZATION MODE  . Press UNLOCK button on RKE transmitter. Count number of chimes in order to determine current mode (1 or 2). See REMOTE UNLOCK CONTROL CUSTOMIZATION MODE  table.
    REMOTE UNLOCK CONTROL CUSTOMIZATION MODE

    Mode Driver Door Unlock Only Liftgate & Doors Unlock
    1 Disabled Enabled
    2 (1) (2)
    (1) First press of transmitter UNLOCK button.
    (2) Second press (within 5 seconds) of transmitter UNLOCK button.
  2. To change mode, press UNLOCK button on RKE system transmitter until desired mode is reached. Chime will sound number of times equivalent to mode. Chime indicator sequence will repeat after chime sounds for mode 2. Mode 2 is default mode.
  3. To exit and save current feature customization mode settings, turn ignition switch to LOCK position. Reinstall BCM PRGRM (10-amp) fuse. If unable to change modes, diagnose RKE system fault. See REMOTE KEYLESS ENTRY DIAGNOSTIC SYSTEM CHECK  under SELF-DIAGNOSTIC SYSTEM.
scientia non olet · About LEMON Manuals