Installation Procedure
WARNING: This page is about a different car, the 2020 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the electrical connectors.
Instrument Panel Compartment (1) - Install
- CAUTION:
Refer to Fastener Caution .
Instrument Panel Compartment Bolt (1) - Install and tighten [ 5x ] - Fastener Specifications
Connect the electrical connector.
- Instrument Panel Lower Airbag - Passenger Side (2) - Install
- Instrument Panel Lower Airbag Nut (1) - Install and tighten [ 2x ] - Fastener Specifications
Connect the electrical connectors.
- Instrument Panel Lower Trim Panel Insulator (1) - Install
- Install the front edge of the front floor console extension panel into the instrument panel lower trim panel insulator (1).
Instrument Panel Insulator Bolt (1) - Install and tighten [ 4x ] - Fastener Specifications
Unlock and lower the body control module bracket (2).
- Connect the electrical connectors.
- Close and lock the body control module bracket (2) into the instrument panel lower trim panel insulator.
- Body Control Module Bracket Bolt (1) - Install and tighten - Fastener Specifications
Instrument Panel Outer Trim Cover - Right Side (1) - Install
- Enable the SIR System. SIR Disabling and Enabling .
- Clear DTCs