LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2003 >> Town & Country Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules >> Sliding Door Control Module >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Sliding Door Control Module: Removal

  1. Disconnect and isolate the negative battery cable.
  2. Remove the appropriate door trim panel from the vehicle. Refer to BODY for the procedure.
  3. Remove the weather shield. Refer to BODY for the procedure.
  4. Disconnect the power door control module electrical connectors. Slide the red locking tab out (away from module) and depress connector retaining tab, while pulling straight apart.
  5. Remove the control module retaining screw (Figure ).
  6. Remove the module from the vehicle.
scientia non olet · About LEMON Manuals