LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 287 (Electronic Control Modules (Service Information)) >> Module-Front Control >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module-Front Control: Removal

WARNING: This page is about a different car, the 2005 Dodge Pickup and 2005 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Front Control Module & Integrated Power Module
GC0006119Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect and isolate the battery negative cable (3).
  2. Partially remove the Integrated Power Module (IPM) (4) from the engine compartment (Refer to ELECTRICAL/POWER DISTRIBUTION/INTEGRATED POWER MODULE - REMOVAL) .
  3. Remove the Front Control Module (FCM) retaining screws.
  4. Using both hands, separate the FCM from the IPM assembly disengaging the 49-way electrical connector and remove the FCM from the vehicle.
scientia non olet · About LEMON Manuals