LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2005 >> PT Cruiser Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 192 (Electronic Control Modules) >> Antilock Brake Module >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Antilock Brake Module: Removal

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: ABM HARNESS CONNECTOR
GC0025535Courtesy of DAIMLERCHRYSLER CORP.
1 - ABM MODULE
2 - ABM MODULE MOUNTING SCREWS
3 - ABM UNIT
4 - ELECTRICAL CONNECTOR
5 - MOUNTING BRACKET
  1. Remove the negative battery cable from the battery.
  2. Pull up on the ABM harness connector (4) release and remove connector. See Fig 1.
  3. Remove the pump connector from the ABM.
    Fig 2: ABM MOUNTING
    GC0025536Courtesy of DAIMLERCHRYSLER CORP.
    1 - BRAKE LINES
    2 - ABM UNIT
    3 - MOUNTING NUTS
  4. Remove the brake lines (1) from the ABM (2).
  5. Remove the ABM (2) mounting nuts (3). See Fig 2.
  6. Remove the ABM unit from the vehicle.
    Fig 3: ABM HARNESS CONNECTOR
    GC0025535Courtesy of DAIMLERCHRYSLER CORP.
    1 - ABM MODULE
    2 - ABM MODULE MOUNTING SCREWS
    3 - ABM UNIT
    4 - ELECTRICAL CONNECTOR
    5 - MOUNTING BRACKET
  7. Remove the ABM module (1) mounting screws (2) from the ABM unit (3). See Fig 3(Refer to BRAKES/HYDRAULIC/MECHANICAL/HCU (HYDRAULIC CONTROL UNIT) - DISASSEMBLY ).
scientia non olet · About LEMON Manuals