LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2007 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 95 (Electronic Control Modules (Service Information)) >> Module-Engine Control >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module-Engine Control: Removal

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Battery Location
GC0041466Courtesy of DAIMLERCHRYSLER CORP.
1 - BATTERY
2 - PASSENGER SEAT
  1. Disconnect negative battery (1) cable.
  2. Remove air cleaner housing assembly (Refer to ENGINE/AIR INTAKE SYSTEM/AIR CLEANER HOUSING - REMOVAL) or (Refer to ENGINE/AIR INTAKE SYSTEM/AIR CLEANER HOUSING - REMOVAL) .
    Fig 2: Locating ECM And Bracket Assembly
    GC0043477Courtesy of DAIMLERCHRYSLER CORP.
    1 - ECM
    2 - ECM BRACKET
    3 - RETAINING BOLTS
    4 - AIR CLEANER HOUSING MOUNTING BRACKET
  3. Disconnect both ECM electrical connectors by pulling tabs at ends of connectors.
  4. Remove ECM bracket (2) retaining bolts (3) and remove ECM and bracket (2) assembly from vehicle. See Fig 2.
    Fig 3: Removing/Installing ECM And Bracket Assembly
    GC0043478Courtesy of DAIMLERCHRYSLER CORP.
    1 - ECM
    2 - ECM BRACKET
    3 - RETAINING NUTS
  5. Remove ECM to bracket retaining nuts (3) and remove ECM (1) from bracket (2). See Fig 3.
scientia non olet · About LEMON Manuals