LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2007 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Electronic Control Modules - Service Information >> Module-Engine Control >> Removal >> Engine Control Module (ECM)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine Control Module (ECM)

Fig 1: Battery Location
GC0041466Courtesy of CHRYSLER LLC
1 - BATTERY
2 - PASSENGER SEAT
  1. Disconnect negative battery (1) cable.
  2. Remove air cleaner housing assembly. Refer to Refer to HOUSING-AIR CLEANER .
    Fig 2: Locating ECM And Bracket Assembly
    GC0043477Courtesy of CHRYSLER LLC
    1 - ECM
    2 - ECM BRACKET
    3 - RETAINING BOLTS
    4 - AIR CLEANER HOUSING MOUNTING BRACKET
  3. Disconnect both ECM electrical connectors by pulling tabs at ends of connectors.
  4. Remove ECM bracket (2) retaining bolts (3) and remove ECM and bracket (2) assembly from vehicle. See Fig 2.
    Fig 3: Removing/Installing ECM And Bracket Assembly
    GC0043478Courtesy of CHRYSLER LLC
    1 - ECM
    2 - ECM BRACKET
    3 - RETAINING NUTS
  5. Remove ECM to bracket retaining nuts (3) and remove ECM (1) from bracket (2). See Fig 3.
scientia non olet · About LEMON Manuals