LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2000 >> Durango 5.2 Y >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Modules >> System Tests >> Power Door Lock & RKE Systems >> One Door Fails To Lock/Unlock From Any Switch
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

One Door Fails To Lock/Unlock From Any Switch

  1. Turn ignition switch to OFF position. Disconnect inoperable door lock motor harness connector. Disconnect CTM connector C2. Measure resistance of Orange/Black wire between CTM connector C2 terminal No. 1 and inoperable door lock motor harness connector. If reading is more than 5 ohms, locate and repair open in Orange/Black wire. Perform BODY VERIFICATION TEST  . If reading is 5 ohms or less, go to next step.
    NOTE: Door lock driver circuit (Orange/Black wire) and door unlock driver circuit (Pink/Black wire) wiring harness splice is located in wiring harness of driver's door sill, beneath driver's seat.
  2. Ensure ignition switch is in OFF position. Measure resistance of door unlock driver circuit (Pink/Black wire) between CTM connector C2 terminal No. 9 and inoperable door lock motor harness connector. If reading is more than 5 ohms, locate and repair open in Pink/Black wire. Perform BODY VERIFICATION TEST  . If reading is 5 ohms or less, replace inoperable door lock motor.
scientia non olet · About LEMON Manuals