Ignition Coil-On-Plug: Removal

Both sides 

1. If equipped: Remove the engine appearance cover retainers and then remove the engine appearance cover.

   Courtesy of FORD MOTOR COMPANY

   Left side 

2. Disconnect the quick release couplings. Refer to: Quick Release Coupling

   Courtesy of FORD MOTOR COMPANY

3. Release the electrical harness retainers from the ignition coil-on-plug studbolts. Disconnect the ignition coil-on-plug electrical connectors.

   Courtesy of FORD MOTOR COMPANY

4. NOTE: Use compressed air to remove any foreign material from the ignition coil-on-plugs and surrounding area before removing the ignition coil-on-plugs.
   NOTE: When removing the ignition coil-on-plugs, a slight twisting motion will break the seal and ease removal.

   Remove the ignition coil-on-plug retaining studbolts, then remove the ignition coil-on-plugs.

   Courtesy of FORD MOTOR COMPANY

   Right side 

5. Disconnect the quick release couplings and then remove the crankcase ventilation hose. Refer to: Quick Release Coupling

   Courtesy of FORD MOTOR COMPANY

6. Remove the air cleaner outlet pipe RH. Refer to: Air Cleaner Outlet Pipe RH
7. Detach the wire harness retainers from the studbolts.

   Courtesy of FORD MOTOR COMPANY

8. Disconnect the ignition coil-on-plug electrical connectors.

   Courtesy of FORD MOTOR COMPANY

9. NOTE: Use compressed air to remove any foreign material from the ignition coil-on-plugs and surrounding area before removing the ignition coil-on-plugs.
   NOTE: When removing the ignition coil-on-plugs, a slight twisting motion will break the seal and ease removal.

   Remove the ignition coil-on-plug retaining studbolts, then remove the ignition coil-on-plugs.

Courtesy of FORD MOTOR COMPANY