Installation Procedure
Suspension Control Module (1) - Install
- Electronic Suspension Control Module Bracket Nut (2) - Install and tighten [3x] - Fastener Specifications
Connect the suspension control module wire harness connector (2).
Rear Wheelhouse Liner (1) - Install
- Rear Wheelhouse Liner Bolt (3) - Install and tighten [6x] - Fastener Specifications
- Rear Wheelhouse Liner Retainer (2) - Install
Rear Tire Front Air Deflector (2) - Install
- Rear Tire Front Air Deflector Bolt (1) - Install and tighten [3x] - Fastener Specifications
- Install the left rear tire and wheel assembly. Tire and Wheel Removal and Installation
- Remove the support and lower the vehicle.
- Connect the battery negative cable. Battery Negative Cable Disconnection and Connection
- After installation, program the electronic suspension controller. Control Module References
- Perform the automatic level control trim height learn. Automatic Level Control Trim Height Learn
CAUTION:
Refer to Fastener Caution .