LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2013 >> Insight Base >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Climate Control >> Climate Control Unit Knob Dial Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Climate Control Unit Knob Dial Replacement

NOTE:
  • Do not work in a dusty or dirty place.
  • Do not work with dusty hands.
  • Discharge static electricity from your body before and during the work.
  • Do not touch the circuit board(s) with your bare hands.
  1. Remove the climate control unit (see CLIMATE CONTROL UNIT REMOVAL/INSTALLATION ).
  2. Remove the self-tapping screws, and open the cover.
    Fig 1: Identifying Cover And Self-Tapping Screws
    G08094441Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the self-tapping screws (A).
    Fig 2: Identifying Self-Tapping Screws
    G08094442Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Pull out knob dial (A).
    Fig 3: Pulling Out Knob Dial
    G08094443Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Install the knob dial in the reverse order of removal. After installation, operate the various functions to see whether it works properly.
    NOTE: Push the knob dial into appropriate position until it clicks.
  6. Run the self-diagnostic function to confirm that there are no problems in the system (see HOW TO USE THE SELF-DIAGNOSTIC FUNCTION WITHOUT THE HDS ).
scientia non olet · About LEMON Manuals