Diagnostic Test: Navi System Link
WARNING: This page is about a different car, the 2011 Honda Pilot, 2010 Honda Pilot, and 2009 Honda Pilot. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Check any official Honda service website for more service information about the navigation system.
- Check for and resolve all CAN DTCs before troubleshooting the navigation system.
- Check the connectors for poor connections or loose terminals.
- Before troubleshooting, make sure you have the anti-theft codes for the navigation system.
- After troubleshooting, enter the anti-theft codes for the navigation system.
- Verify that the correct navigation unit is installed for this model. Go into the Diagnostic mode, and use VERSION .
- Make sure that the correct navigation DVD color and version are installed.
- Turn the ignition switch to ON (II).
- Make sure the anti-theft code for the audio system is entered.
- Go into the Diagnostic mode, and use the Navi System Link diagnostic (see SYSTEM DIAGNOSTIC MODE ).
- Check the System Links.
Is the Radio icon red?
YES - Do the troubleshooting for the voice guidance cannot be heard (see VOICE GUIDANCE CANNOT BE HEARD, IS BROKEN UP, OR THERE IS STATIC ). ■
NO - Go to step 5.
- Substitute a known-good navigation unit (see NAVIGATION UNIT REMOVAL/INSTALLATION
), and recheck.
Can the navigation system control audio/disc?
YES - Replace the navigation unit (see NAVIGATION UNIT REMOVAL/INSTALLATION ). ■
NO - Do the audio system troubleshooting. ■