Engine Control System / Engine Mechanical - Service, Testing And Troubleshooting
- Description & Operation
- Troubleshooting
- Connector View
- Component Location Index
- Symptom Troubleshooting Index for Viewer
- After warming up, idle speed is above specifications without load (MIL works OK, no DTCs set) (Mexico models)
- After warming up, idle speed is above specifications without load (MIL works OK, no DTCs set) (USA/Canada models)
- After warming up, idle speed is below specifications without load (MIL works OK, no DTCs set) (Mexico models)
- After warming up, idle speed is below specifications without load (MIL works OK, no DTCs set) (USA/Canada models)
- Cold fast idle too high (MIL works OK, no DTCs set) (Mexico models)
- Cold fast idle too high (MIL works OK, no DTCs set)(USA/Canada models)
- Cold fast idle too low (MIL works OK, no DTCs set) (Mexico models)
- Cold fast idle too low (MIL works OK, no DTCs set) (USA/Canada models)
- Difficult to refuel(MIL works OK, NO DTCs set) (USA/Canada models)
- Engine is hard to start (MIL works OK, no DTCs set) (Mexico models)
- Engine is hard to start (MIL works OK, no DTCs set) (USA/Canada models)
- Engine stalls (MIL works OK, no DTCs set) (Mexico models)
- Engine stalls (MIL works OK, no DTCs set) (USA/Canada models)
- Engine starts but stalls immediately (MIL works OK, no DTCs set, security indicator stays on or flashes) (Mexico models)
- Engine starts but stalls immediately (MIL works OK, no DTCs set, security indicator stays on or flashes) (USA/Canada models)
- Engine will not start (MIL works OK, no DTCs set) (Mexico models)
- Engine will not start (MIL works OK, no DTCs set) (USA/Canada models)
- Engine will not start (MIL works OK, no DTCs set, security indicator stays on or flashes) (Mexico models)
- Engine will not start (MIL works OK, no DTCs set, security indicator stays on or flashes) (USA/Canada models)
- Engine will not start and HDS does not communicate with the PCM(MIL comes on and stays on, no DTCs set) (Mexico models)
- Engine will not start and HDS does not communicate with the PCM(MIL comes on and stays on, no DTCs set) (USA/Canada models)
- Fails emission test (MIL works OK, no DTCs set) (Mexico models)
- HDS does not communicate with the PCM or the vehicle (Mexico models)
- HDS does not communicate with the PCM or the vehicle (USA/Canada models)
- Idle speed fluctuates (MIL works OK, no DTCs set) (Mexico models)
- Idle speed fluctuates (MIL works OK, no DTCs set) (USA/Canada models)
- Low power (MIL works OK, no DTCs set)(Mexico models)
- Low power (MIL works OK, no DTCs set) (USA/Canada models)
- MIL comes on and stays on, or never comes on at all, no DTCs set (Mexico models)
- MIL comes on and stays on, or never comes on at all, no DTCs set (USA/Canada models)
- General Information
- Removal, Inspection, Installation