LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jaguar >> 2007 >> XJ8 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 186 (Pedestrian Protection System) >> Pedestrian Protection System >> Pedestrian Protection System - Diagnostic Procedures >> Inspection and Verification
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection and Verification

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2009 Jaguar XKR, 2009 Jaguar XK8, 2008 Jaguar XKR, 2008 Jaguar XK8, and 2007 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify the customer concern.
  2. Visually inspect for obvious signs of damage and system integrity.
    Visual Inspection

    Mechanical Electrical
    • Damaged, loose, or missing fixings or components
    • Ensure dummy electrical connector is installed to the Pedestrian Protection module
    • Blown fuse(s)
    • Damaged, loose or corroded connectors
    • Wiring harness
    • Damaged Pedestrian Protection module
  3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
  4. If the cause is not visually evident, check for Diagnostic Trouble Codes (DTCs) and refer to DTC Index .