Symptom Id Test 1A - Identifying Vehicle Equipment & System Problems
NOTE:
Perform a visual inspection before proceeding.
- Connect scan tool to Data Link Connector (DLC). DLC is a 16-pin connector located on left side of steering column, above brake pedal. Turn ignition on. If scan tool display is not blank, go to next step. If scan tool display is blank, go to TEST 1A
under VEHICLE COMMUNICATIONS.
- Using scan tool, select BODY SYSTEM, then BODY COMPUTER. Scan tool will perform a CCD bus test. If scan tool displays BUS OPERATIONAL, go to next step. If scan tool displays NO RESPONSE, go to TEST 3A
under VEHICLE COMMUNICATIONS. If scan tool displays any other message, go to TEST 1A
under VEHICLE COMMUNICATIONS.
- Using scan tool, select READ DTCs. If any fault messages are displayed, go to SYMPTOM ID TEST 1B
. If no fault messages are displayed, go to SYSTEM DIAGNOSTIC TEST DIRECTORY table for specific diagnosis. Problems listed are diagnosed using a scan tool. These problems may occur separately or in various combinations. When diagnosing a system with many apparent problems, a sequence of tests may be required. At the beginning of each test a note will indicate which test to perform first. After repairs, ensure problem(s) or failure(s) have been corrected.
SYSTEM DIAGNOSTIC TEST DIRECTORY
| Suspected System |
Perform Test No. |
| Chime System |
CHIME TEST 1A |
| Compass/Mini-Trip Computer |
COMPASS/MINI-TRIP TEST 1A |
| Door Ajar System |
DOOR AJAR TEST 1A |
| Exterior Lighting System |
EXTERIOR LIGHTS TEST 1A |
| Instrument Cluster |
INSTRUMENT CLUSTER TEST 1A |
| Interior Lighting System |
INTERIOR LIGHTS TEST 1A |
| Memory Seat System |
MEMORY SEAT TEST 1A |
| Power Door Lock System |
POWER DOOR LOCK TEST 1A |
| Power Mirror System |
POWER MIRROR TEST 1A |
| Power Window System |
POWER WINDOW TEST 1A |
| Vehicle Communication |
VEHICLE COMMUNICATIONS |
| Vehicle Communication |
TEST 1A |
| Anti-Theft System |
ANTI-THEFT SYSTEM TEST 1A |
| Windshield Wiper System |
WINDSHIELD WIPER TEST 1A |