Remote Keyless Entry Transmitter
- Depress either transmitter button and verify LED on transmitter case lights. If LED is not on, replace transmitter batteries. See REMOTE KEYLESS ENTRY TRANSMITTER BATTERY under REMOVAL & INSTALLATION. If LED is on, go to next step.
- Using DRB scan tool, perform transmitter program procedure using suspect transmitter and known-good transmitter. If known-good transmitter operates power locks and suspect unit does not, replace faulty transmitter. If both transmitters fail to operate power locks, see REMOTE KEYLESS ENTRY RECEIVER .
- After test is complete, using DRB scan tool, perform transmitter program procedure. This will erase access code of test transmitter from keyless entry receiver.