LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2000 >> Grand Cherokee Laredo, 4.0 S, AWD >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Modules >> System Tests >> Overhead Console >> EVIC Mileage & Distance Functions
April 5, 2026: LEMON Manuals is launched! Read the announcement.

EVIC Mileage & Distance Functions

  1. Turn ignition on. Try remaining functions on Electronic Vehicle Information Center (EVIC). If remaining functions operate properly, go to next step. If remaining functions do not operate properly, replace EVIC. See ELECTRONIC VEHICLE INFORMATION CENTER  under REMOVAL & INSTALLATION. Perform BODY VERIFICATION TEST  under VERIFICATION TESTS.
  2. Using scan tool, check for Powertrain Control Module (PCM) DTCs. If no PCM DTCs are set, go to next step. If any PCM DTCs are set, go to SELF-DIAGNOSTICS - GRAND CHEROKEE article in ENGINE PERFORMANCE.
  3. Possible causes of this fault code are improper fuel injector pulse rates, pinion factor (transmission control module not programmed), improper fuel fill procedures (loose gas cap) or incorrect tire sizes. If any of these problems are related to EVIC MILEAGE AND DISTANCE FUNCTIONS DTC, go to appropriate system and diagnose possible fault area. Perform BODY VERIFICATION TEST  under VERIFICATION TESTS. If none of these fault areas are related to EVIC MILEAGE AND DISTANCE FUNCTIONS DTC, test is complete. Perform BODY VERIFICATION TEST  under VERIFICATION TESTS.
scientia non olet · About LEMON Manuals