LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2001 >> Cherokee Classic, 4WD, Part Time >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Removal, Overhaul & Installation >> Computerized Engine Controls >> Powertrain Control Module >> Removal & Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation

  1. PCM is located in engine compartment. For PCM location, see PCM LOCATION  table. Turn ignition off. Disconnect negative battery cable. Remove cover for access to PCM connectors. Disconnect PCM connectors. Remove PCM retaining bolts and PCM.
  2. To install, reverse removal procedure. Tighten PCM retaining bolts to specification. See TORQUE SPECIFICATIONS .
PCM LOCATION

Application Location
Cherokee In Engine Compartment, On Left Front Fender, Near Radiator Support
Grand Cherokee & Wrangler On Firewall, In Right Rear Corner Of Engine Compartment
scientia non olet · About LEMON Manuals