Cover(S), Engine Timing: Removal
WARNING: This page is about a different variant/trim than selected.
- Remove the throttle body. Refer to 6.4L .
- Remove the water pump. Refer to 5.7L/6.4L
.
- Disconnect the camshaft position sensor wire harness connector (1).
- Remove A/C compressor from the front timing chain cover and position aside. Refer to COMPRESSOR, A/C, REMOVAL .
- Remove the generator from the front timing chain cover and position aside. Refer to 6.4L .
- Remove the vibration damper. Refer to DAMPER, VIBRATION, REMOVAL .
- Remove the five front oil pan to timing cover bolts (1).
- Remove the engine timing cover retaining bolts (1) and remove the engine timing cover.
- Verify that the engine timing cover slide bushings (1) remain located in the engine timing cover.