LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2000 >> MPV DX >> Repair and Diagnosis >> External Pages >> Different car >> Section 148 (Air Bag System) >> Removal & Installation >> Seat Weight Sensor Control Module >> Removal & Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation

WARNING: This page is about a different car, the 2004 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before proceeding, see AIR BAG SAFETY PRECAUTIONS  . Disable air bag system. See DISABLING SYSTEM  under DISABLING & ACTIVATING AIR BAG SYSTEM.
  2. Remove appropriate front seat. Remove front seat under tray. Remove screws, disconnect electrical connectors and remove seat weight sensor control module. See Figure .
  3. To install, reverse removal procedure. Activate air bag system. See ACTIVATING SYSTEM  under DISABLING & ACTIVATING AIR BAG SYSTEM. Perform seat weight sensor inspection and calibration. See SEAT WEIGHT SENSOR CONTROL MODULE INSPECTION & CALIBRATION  .
scientia non olet · About LEMON Manuals