LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2000 >> MPV ES >> Repair and Diagnosis >> External Pages >> Different car >> Section 202 (Automatic Transaxle [Shift Mechanism]) >> Selector Lever Removal/Installation >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Selector Lever Removal/Installation: Notes

WARNING: This page is about a different car, the 2004 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the battery and battery tray.
  3. Remove the air cleaner component.

    (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [L3] .)

    (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [AJ] .)

  4. Remove the center console.
  5. Remove the dashboard completely.

    (See DASHBOARD REMOVAL/INSTALLATION .)

  6. Remove the SAS control module (air bag module). SAS CONTROL MODULE

  7. Remove the climate control unit.

    (See CLIMATE CONTROL UNIT REMOVAL .)

    (To install climate control unit, see CLIMATE CONTROL UNIT INSTALLATION .)

  8. Remove the rear heat duct.

    (See REAR HEAT DUCT REMOVAL/INSTALLATION .)

  9. Remove in the order shown in Fig 1.
  10. Install in the reverse order of removal.
    Fig 1: Removing/Installing Selector Lever
    G01012174Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals