LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2001 >> MX-5 Miata Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Washer System & Wiper System) >> Washer Fluid-Level Sensor Removal/Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Washer Fluid-Level Sensor Removal/Installation

WARNING: This page is about a different car, the 2004 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the washer tank. (See WINDSHIELD WASHER TANK REMOVAL/INSTALLATION  )
  3. Disconnect the connector.
  4. Remove the washer fluid-level sensor.
  5. Remove the grommet.
  6. Install in the reverse order of removal.
    Fig 1: Removing/Installing Washer Fluid-Level Sensor
    G01344634Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals