Component Test - Window Control Switch - Driver Side

1. Remove the window control switch. See WINDOW CONTROL SWITCH REMOVAL/INSTALLATION  .
2. Inspect for continuity between the window control switch terminals using a self-powered test light or an ohmmeter.

Fig 1: Window Control Switch Schematic With Terminals (Driver Side)

Courtesy of MAZDA MOTORS CORP.

COMPONENT TEST - WINDOW CONTROL SWITCH (DRIVER SIDE)

Circuit to Test	Connect Self-Powered Test Light or Ohmmeter to Terminals	Move Switch to These Positions	A Good Switch Will Indicate
Switch Lock	2 (0912-201a) and 1 (0912-201b)	Unlock	Closed circuit
		Lock	Open circuit
Left front window circuit	2 (0912-201a) and 5 (0912-201a)	Up	Closed circuit
Right front window circuit	2 (0912-201a) and 3 (0912-201a) 2 (0912-201a) and 8 (0912-201a) 7 (0912-201b) and 8 (0912-201a) 7 (0912-201b) and 3 (0912-201a)	Down Up Rest	Closed circuit Closed circuit Closed circuit
Left rear window circuit	2 (0912-201a) and 1 (0912-201b) 2 (0912-201a) and 6 (0912-201b) 7 (0912-201b) and 1 (0912-201b) 7 (0912-201b) and 6 (0912-201b)	Up Down Rest	Closed circuit Closed circuit Closed circuit
Right rear window circuit	2 (0912-201a) and 8 (0912-201b) 2 (0912-201a) and 4 (0912-201 b) 7 (0912-201b) and 8 (0912-201b) 7 (0912-201b) and 4 (0912-201b)	Up Down Rest	Closed circuit Closed circuit Closed circuit