LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2011 >> 3 Mazdaspeed, 2.3 4 >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Headlights >> Lighting System >> Auto Light/Wiper Control Module Inspection >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Auto Light/Wiper Control Module Inspection: Notes

  1. Remove the following parts:
    1. Passenger-side front scuff plate (See FRONT SCUFF PLATE REMOVAL/INSTALLATION ).
    2. Passenger-side front side trim (See FRONT SIDE TRIM REMOVAL/INSTALLATION ).
    3. Dashboard under cover (See DASHBOARD UNDER COVER REMOVAL/INSTALLATION ).
    4. Grove compartment (See GLOVE COMPARTMENT REMOVAL/INSTALLATION ).
    5. Passenger-side lower panel (See LOWER PANEL REMOVAL/INSTALLATION ).
  2. Remove the auto light/wiper control module with the connector connected. (See AUTO LIGHT/WIPER CONTROL MODULE REMOVAL/INSTALLATION ).
  3. Measure the voltage at the auto light/wiper control module terminals as indicated below.
scientia non olet · About LEMON Manuals