Body Control Module (BCM) Bracket Removal/Installation: Installation
- Bend the tabs in the direction of the arrow (1) so that clearance (a) indicated in the figure is within the specification.
Clearance
a: 0.8-1.2 mm {0.032-0.047 in}
- Press the BCM in the direction of the arrow (2) as shown in the figure and install it.
- Install the BCM. (See BODY CONTROL MODULE (BCM) REMOVAL/INSTALLATION ).
- Install the glove compartment. (See GLOVE COMPARTMENT REMOVAL/INSTALLATION ).
- Install the dashboard under cover. (See DASHBOARD UNDER COVER REMOVAL/INSTALLATION ).
- Connect the negative battery cable.