Body Control Module (BCM) Bracket Removal/Installation: Removal
- Disconnect the negative battery cable.
- Remove the dashboard under cover. (See DASHBOARD UNDER COVER REMOVAL/INSTALLATION ).
- Remove the glove compartment. (See GLOVE COMPARTMENT REMOVAL/INSTALLATION ).
- Remove the BCM. (See BODY CONTROL MODULE (BCM) REMOVAL/INSTALLATION ).
- Insert a fastener remover in the direction of the arrow (1) shown in the figure and release the tabs.CAUTION:
- Because the tabs will break if they are bent excessively, bend the tabs only so far as to allow them to release from the BCM.
- Pull the BCM in the direction of the arrow (2) as shown in the figure and remove the BCM bracket.