LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2013 >> 5 Touring >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System/Washer System >> Washer Fluid-Level Sensor Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Washer Fluid-Level Sensor Inspection

  1. Disconnect the negative battery cable.
  2. Remove the front bumper. (See FRONT BUMPER REMOVAL/INSTALLATION .)
  3. Remove the washer tank. (See WASHER TANK REMOVAL/INSTALLATION .)
  4. Verify that continuity between the washer fluid-level sensor terminals is as indicated in the table.
    Fig 1: Inspecting Continuity Between Washer Fluid-Level Sensor Terminals
    G08153402
    Fig 2: Washer Fluid-Level Sensor Terminals Continuity Chart
    G08153403
scientia non olet · About LEMON Manuals