Diagnostic Procedure
WARNING: This page is about a different car, the 2018 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
DTC U3000:42 (AUTO LEVELING CONTROL MODULE) DIAGNOSTIC PROCEDURE
| Step | Inspection | Action | |
|---|---|---|---|
| 1 | VERIFY IF MALFUNCTIONING LOCATION IS AUTO LEVELING CONTROL MODULE DEPENDING ON REPEATABILITY
|
Yes | Replace the auto leveling control module, then go to the next step. (See AUTO LEVELING CONTROL MODULE REMOVAL/INSTALLATION .) |
| No | Go to the next step. | ||
| 2 | VERIFY IF OTHER DTCs DISPLAYED
|
Yes | Repair or replace the malfunctioning part according to the applicable DTC troubleshooting. (See DTC TABLE (AUTO LEVELING CONTROL MODULE) .) |
| No | DTC troubleshooting completed. | ||