Triggering alarm with interior motion sensor, function - GF80.50-P-3022A
MODEL 202 as of 1.6.97 up to 31.5.98, 202.07 /08 /18 as of 1.6.98, 208 (except 208.4), 210.081 up to 31.5.98, 210.281, 210.0 (except 210.081) as of 1.3.97 up to 31.5.98, 210.2 (except 210.281) as of 1.3.97 up to 31.5.99 with CODE (882a) Interior motion sensor (infrared)
Function prerequisites
An alarm can be triggered by the interior motion sensor (IMS) when:
- at least one of the left or right infrared transmitter and receiver units (interior motion sensor) (A26/4, A26/5) is activated and
- the IMS function has not been switched off.
Function
The interior motion sensor (IMS) monitors the inside of the windows with infrared (IR) light with the aid of the interior motion sensor transmitter and receiver units .
The interior motion sensor transmitter and receiver unit signals a breaking attempt to the pneumatic system equipment (PSE) control module (combined) (A37) via a data bus.
The PSE control module (A37) then triggers an optical and acoustic alarm .
On the T-models, the rear side windows and rear window are also monitored by glass breakage sensors .
A maximum of three alarms in sequence can be triggered by the IMS feature.
| Activating anti-theft alarm (ATA), function | up to 5/98 | GF80.50-P-2002C | |
| as of 6/98 | GF80.50-P-2002J | ||
| Switching off interior motion sensor (IMS), function | GF80.50-P-3025A | ||
| Acoustic alarm, function | up to 5/98 | GF80.50-P-4005A | |
| as of 6/98 | GF80.50-P-4005C | ||
| Optical alarm, function | up to 5/98 | GF80.50-P-4006A | |
| as of 6/98 | GF80.50-P-4006C | ||
| Interior motion sensor (IMS), transmitter and receiver unit, location/purpose/design/function | GF80.50-P-4104A | ||
| Glass breakage sensor, location/purpose/design/function | T-model only | GF80.50-P-4107A |