Sliding Door Control Module: Removal
WARNING: This page is about a different car, the 2004 Dodge Grand Caravan, 2004 Dodge Caravan, and 2004 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect and isolate the negative battery cable.
- Remove the appropriate door trim panel from the vehicle. Refer to TRIM PANEL for the procedure.
- Remove the weather shield. Refer to SLIDING DOOR WEATHERSTRIP for the procedure.
- Disconnect the power door control module electrical connectors. Slide the red locking tab out (away from module) and depress connector retaining tab, while pulling straight apart.
- Remove the control module retaining screw (Figure).
- Remove the module from the vehicle.