86 21... Removing side lid hinge
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2013 BMW 135i, 2013 BMW 128i, 2012 BMW 135i, 2012 BMW 128i, and 2011 BMW 135i. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Remove side lid,
refer to 86 21... REMOVING LID .
Remove gas spring, remove gas spring on hinge side only,
refer to 86 21... REMOVING GAS SPRING .
refer to 86 21... REMOVING LID .
Remove gas spring, remove gas spring on hinge side only,
refer to 86 21... REMOVING GAS SPRING .
Unscrew bolt (1). Remove hinge (2). If fitted, remove spacer plate(s) (3).
Installation:
Pass screws (1) again through spacer tubes. Reinstall existing spacer plate(s) in its/their original position(s). Use new self-locking nuts.
Tightening Torque,
refer to 86 21 6AZ, see 86 21 HOOD