32 00... Moving Vehicle Into Design Position
WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Move vehicle into normal position . See 32 00... MOVING VEHICLE INTO NORMAL POSITION .
- Version with air spring system:
- Remove ignition key
- Pull fuse for air supply unit control unit
- Add/distribute weights in area of spring struts until the vehicle ride height is within the tolerance (refer to TECHNICAL DATA
).
Measure ride-level height of vehicle . See 31 33 095 MEASURING RIDE-LEVEL HEIGHT OF VEHICLE .