61 13... Opening plug housings and removing contacts of different plug systems: Notes
WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- 61 0 300
- 61 0 400
- 61 1 100
- 61 1 150
| Abbreviations of contacts and what they mean: | |
|---|---|
| ELA | Strand seal |
| D 1.5 / 2.5 / 3.5 | Round contacts with 1.5 mm, 2.5 mm or 3.5 mm diameter |
| MDK | Miniature double flat spring contact |
| JPT | Junior Power timer |
| DFK | Double flat spring contacts |
| Elo | Electronic contacts |
| Elo Power | Electronic contacts for heavy load |
| MQS | Micro Quadlock system |
| MPQ | Micro Power Quadlock |
| MLK | Mini laminated contact |
| SLK | Sensor laminated contact |
| MLK | Mini laminated contact |
| Mcon | Multi contact |
IMPORTANT:
The contacts can be changed on ultrasonically welded connectors (1).
Ultrasonically welded connectors (1) must be replaced completely.
Ultrasonic-welded connectors (1) can be identified by the welds (2) on their longitudinal side.
NOTE:
Special tools referred to in the repair instructions below are contained in the following special tool kits:
- Release and press-out tool 61 1 150 is replaced from 09/2005 by 61 0 300 (BMW) and 61 0 400 (MINI)
- Release and press-out tool 61 1 100 (engine)
Index of connectors:
- CONNECTOR HOUSING, LCC CONTACT (LOAD CURRENT CONTACT)
- IN-LINE PLUGS, 2-PIN, SYSTEM JPT ELA
- IN-LINE PLUGS, 24-PIN, HYBRID SYSTEM MQS/MPQ
- IN-LINE PLUGS, 30-PIN, HYBRID SYSTEM MQS/MPQ
- IN-LINE PLUGS, 6- TO 50-PIN, SYSTEM ELO
- INLINE PLUGS, 6-, 8- PIN, SYSTEM MQS
- INLINE PLUGS, 8-, 12- PIN, SYSTEM D2.5
- SOCKET HOUSING (RADIO PLUG), HYBRID SYSTEM MQS/MPQ
- SOCKET HOUSING 42-, 43-PIN, HYBRID SYSTEM MQS / MPQ
- SOCKET HOUSINGS, 2X21-, 2X27-PIN, HYBRID SYSTEMS MQS/MPQ, ELO/ELO-POWER
Special tools required:
- 61 0 300
- 61 0 400
- 61 1 100
- 61 1 150
| Abbreviations of contacts and what they mean: | |
|---|---|
| ELA | Strand seal |
| D 1.5 / 2.5 / 3.5 | Round contacts with 1.5 mm, 2.5 mm or 3.5 mm diameter |
| MDK | Miniature double flat spring contact |
| JPT | Junior Power timer |
| DFK | Double flat spring contacts |
| Elo | Electronic contacts |
| Elo Power | Electronic contacts for heavy load |
| MQS | Micro Quadlock system |
| MPQ | Micro Power Quadlock |
| MLK | Mini laminated contact |
| SLK | Sensor laminated contact |
| MLK | Mini laminated contact |
| Mcon | Multi contact |
IMPORTANT:
The contacts can be changed on ultrasonically welded plugs (1).
Ultrasonically welded plugs (1) must be replaced completely.
Ultrasonic-welded connectors (1) can be identified by the welds (2) on their longitudinal side.
Ultrasonically welded plugs (1) must be replaced completely.
Ultrasonic-welded connectors (1) can be identified by the welds (2) on their longitudinal side.
NOTE:
Special tools referred to in the repair instructions below are contained in the following special tool kits:
- Release and press-out tool 61 1 150 is replaced from 09/2005 by 61 0 300 (BMW) and 61 0 400 (MINI).
- Release and press-out tool 61 1 100 (engine).
Repair instructions for opening plug housings and removing contacts of different plug systems.