Cylinder Block Specifications
CYLINDER BLOCK
| Application | In. (mm) | ||||||
|---|---|---|---|---|---|---|---|
| Cylinder Bore | |||||||
| Standard Diameter (1) | |||||||
| Grade No. 1 | 3.3858-3.3862 (85.999-86.009) | ||||||
| Grade No. 2 | 3.3862-3.3866 (86.009-86.020) | ||||||
| Grade No. 3 | 3.3866-3.3870 (86.020-86.030) | ||||||
| Maximum Taper | .0004 (.010) | ||||||
| Maximum Out-Of-Round | .0006 (.015) | ||||||
| Main Bearing Bore I.D (2) | |||||||
| Grade No. 0 | 2.3206-2.3209 (58.943-58.951) | ||||||
| Grade No. 1 | 2.3209-2.3211 (58.951-58.956) | ||||||
| Grade No. 2 | 2.3211-2.3213 (58.956-58.961) | ||||||
| Grade No. 3 | 2.3213-2.3216 (58.961-58.969) | ||||||
| Deck Height | 8.3169-8.3209 (211.249-211.351) | ||||||
| Maximum Deck Warpage | .0039 (.099) | ||||||
|
|||||||