Select Lever: Assembly
WARNING: This page is about a different variant/trim than selected.
- Clean all parts before assembly.
- Apply grease to each select lever parts. < Ref. to
AT SELECT LEVER , COMPONENT, General Description. >
Lock plate:
SUNCALL GREASE (Part No. 002948040)
Except lock plate:
SUNLIGHT 2 (Part No. 003602010) or equivalent
- Assembly is in the reverse order of disassembly.
- After completion of fitting, transfer the select lever to range "P" - "1", then check whether the indicator and select lever agree, whether the pointer and position mark agree and what the operating force is.