LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (LAN System (Diagnostics)) >> Read Current Data >> Operation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Read Current Data: Operation

WARNING: This page is about a different car, the 2006 Subaru Outback, 2006 Subaru Legacy, and 2006 Saab 9-2X. However, it is still accessible from the selected car via links, so may be relevant.
  1. On the «Main Menu» display screen, select {Each System Check} and press the [YES] key.
  2. On the «System Selection Menu» display screen, select the {Integ. unit mode} and press the [YES] key.
  3. On the «Integ. unit mode failure diag» display screen, select the {Current Data Display & Save} and press the [YES] key.
  4. On the «Data Display Menu» screen, select the {12 Data Display} and press the [YES] key.
  5. Using the scroll key, scroll the display screen up or down until the desired data is shown.

    < Ref. to DISPLAY OF ANALOG DATA , OPERATION, Subaru Select Monitor. > < Ref. to DISPLAY OF ON/OFF DATA , OPERATION, Subaru Select Monitor. > < Ref. to CONFIRMATION OF CURRENT SETTING , OPERATION, Subaru Select Monitor. >

scientia non olet · About LEMON Manuals