Front Differential Assembly: Installation
WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
- When installing the differential assembly to case, be careful not to damage the inside of case (particularly, the differential side retainer mating surface).
- Install the O-ring to left and right side retainer.
- Using the ST, install the side retainer. < Ref. to
REMOVAL , Front Differential Assembly. >
ST 18630AA010 WRENCH COMPL RETAINER
- Adjust the backlash of the front differential. < Ref. to ADJUSTMENT , Front Differential Assembly. >
- Install the lock plate.
Tightening torque:
25 N.m (2.5 kgf-m, 18 ft-lb)
- Install the converter case to the transmission case. < Ref. to INSTALLATION , Converter Case. >
- Install the transmission harness connector to the stay.
- Install the ATF filter pipe. < Ref. to INSTALLATION , ATF Filter. >
- Install the oil charge pipe together with an O-ring. < Ref. to INSTALLATION , Oil Charge Pipe. >
- Install the torque converter assembly. < Ref. to INSTALLATION , Torque Converter Assembly. >
- Install the transmission assembly to the vehicle. < Ref. to INSTALLATION , Automatic Transmission Assembly. >