Combination Base Switch Assembly: Removal

WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.

Remove the driver's airbag module. Refer to REMOVAL , Driver's Airbag Module.
Remove the steering wheel. Refer to REMOVAL .
Remove the screws and remove the steering column lower cover.

Fig 1: Locating Steering Column Covers Screws (Upper And Lower)
Courtesy of SUBARU OF AMERICA, INC.
Remove the combination switch. Refer to REMOVAL , Combination Switch (Light). Refer to REMOVAL , Combination Switch (Wiper).
Remove the four screws and remove the roll connector.
Remove the three screws.

Fig 2: Locating Three Screws
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the connector and remove the combination base switch assembly.