Ignition Switch Illumination: Inspection

WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.

DIAGNOSTIC PROCEDURE CHART

Step	Check	Yes	No
1 CHECK THE IGNITION SWITCH ILLUMINATION. Make sure the ignition switch illumination illuminates when driver's side door is open.	Does the ignition switch illumination illuminate?	Ignition switch illumination is normal.	Go to step 2.
2 CHECK THE IGNITION SWITCH ILLUMINATION. Make sure the ignition switch illumination blinks when the ignition switch is turned to ON.	Does the ignition switch illumination blink?	Check the function setting of the body integrated unit. Refer to BASIC DIAGNOSTIC PROCEDURE .	Check the ignition switch illumination circuit. Refer to CHECK IGNITION SWITCH ILLUMINATION , INSPECTION, Keyless Entry System.