Section 4 (Rear Suspension System): General Description: Specification

WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.

Refer to FRONT SUSPENSION article for rear suspension specifications. Refer to SPECIFICATION , General Description.

NOTE:

Front and rear toe-in and front camber can be adjusted. Adjust if the toe-in or camber tolerance exceeds specifications.
Other items indicated in the specifications chart cannot be adjusted. If other items exceed specifications, check the suspension parts and connections for deformation, and replace with new parts as required.

Fig 1: Identifying Toe-In (Front Camber)
Courtesy of SUBARU OF AMERICA, INC.